The steps for driver installation can now be followed.ĭelete temporary setup files (Fixes 'Driver installation failed') Check box 'Delete the driver software for this device' then proceed. Click 'Uninstall' under the 'Driver' tab. Open its context menu (right-click) and select Properties. Open Device Manager (or simply run 'devmgmt.msc'), look for the 'WUP-028' device which is usually under the 'Universal Serial Bus devices'(WinUSB) or 'libusbK devices'(libusbK).Reverting the adapter's driver back to vanilla state

If there is a problem in the installation process, you can completely restart Zadig by following these instructions. When it said the driver is installed successfully then you can close the Zadig setup and continue to #Dolphin Setup below. Select 'Yes' to modify the system driver. On the right column, select 'WinUSB' then click 'Replace Driver'.

If it does not appear in the list then try inserting the adapter (specifically its black USB cord) into another USB port.ģ.

From the 'Options' menu in Zadig, select 'List All Devices'Ģ. If you're using the Mayflash adapter, make sure you switch it to 'Wii U' or Zadig won't pick it up properly.ġ. Plug in the GameCube controller adapter if it hasn't been already. Skip to #Dolphin Setup below if you haven't encountered any problems with it. You probably already have ran Zadig setup if the GameCube USB Adapter Driver version is v3.0 or later. vJoy and Dolphin's native support conflict with one another, so to use the native support in Dolphin, driver services must be stopped through GameCube USB Adapter Driver 's window. force feedback), and offer better latency. Unlike vJoy, Dolphin's native support will offer more straightforward and added missing supports from vJoy (i.e. They can be configured in Dolphin like any other controller. The software that utilizes vJoy drivers, such as GameCube USB Adapter Driver, can treat the GameCube controllers as generic gamepads for Windows. From 5.0-2472 to 5.0-10617 it was possible to alternatively use UsbDk, but it is no longer supported in current versions. On Windows, the GameCube controller adapter will need a custom driver to let Dolphin detect it and use it, Zadig can help you with it. Sudo chown -R root:wheel /Library/Extensions/SmashEnabler.kextįor questions on any of these macOS installation techniques, please see the forum thread. Sudo cp -r ~/Downloads/SmashEnabler.kext /Library/Extensions/SmashEnabler.kext Installing the SmashEnabler standalone kexts must be done via Terminal. Standalone kext for older versions of macOS Terminal Install Installer package for older versions of macOS See this StackExchange thread for more details.

This will lessen security, and is not recommended. The only workaround is to disable kernel-extension signing verification, which can be done in macOS Recovery Mode. On El Capitan (10.11) and later, the unsigned Kernel Extension will fail to load. Standalone kext for macOS El Capitan (10.11) and later System Integrity Protection (SIP) Installer package for macOS El Capitan (10.11) and later Older versions of macOS can be supported by installing SmashEnabler. This method does not require disabling System Integrity Protection (SIP). GCAdapterDriver is an open source project for enabling adapter usage under macOS. GCAdapterDriver Installer Packages for macOS High Sierra (10.13.6) and later You do not need to configure the controllers manually within Dolphin's controller settings but any controllers plugged into the adapter should work immediately. Once installed, Dolphin should be able to recognize that the adapter has been plugged in. Thus in order to use adapters on macOS, a driver needs to be installed that simply grabs and ignores the adapter, and permits a lower-level connection (like the one Dolphin makes). Since the adapter does not supply a valid report descriptor, this makes the IOKit driver useless for direct communication. If you want to change the rule, links for instructions are available on the libusb FAQ.ĭue to the nature of Apple's HID implementation, all HID devices (including non-standard ones) are intercepted by IOKit's HID driver. Dolphin should now detect it in the controller settings (refer to #Dolphin Setup below). Paste the following in the /etc/udev/rules.d/les file (/lib/udev/rules.d/les if making a package):

However, a udev rule must be created to allow access to the device. Linux support does not require any special drivers, as long as Dolphin was built with libusb support. 1.2.2.1.1 System Integrity Protection (SIP).

Can't save profile mac dolphin emulator